Have you been in such a case when your iPhone’s light suddenly turned dim? You might have speculated so many reasons for this issue. Adequately, this could be because of some bugs in the software. On top of that, the wrong configuration of the device can be considered as an error that may fluctuate the light and makes it appear dim.
Best Ways To Solve Dim Screen Issue of iPhone 6 and 6 Plus
Furthermore, for your information, we would like to make you aware of the fact that is depending upon the properties of the issue, you will need to practice more than one solution. There is no estimated time for the process. During the try-outs, if you are fortunate, then you might get your first attempt right.
In this article, we have prepared a list of some handy tricks and tips which would help you fix the dark screen of your iPhone 6 and 6 plus. Make sure to perform each task as mentioned below; you will definitely be able to fix the issue. Before moving to the actual list, here are a few tips that you should apply in the first place.
Tip 1: Reboot Your iPhone 6 and 6 Plus
Usually, the first thing that comes to mind is rebooting the device. It is a universal way to fix some minor issues and bugs in your device. Therefore, before trying anything, restart your device, it would help you solve the issue. To reboot your iPhone, you need to press and hold the Home button and ON/OFF button together. Keep pressing until you see the Apple logo on the screen. If you are using 7/7 plus, then press and hold the volume down & power button to reboot the device.
Tip 2: Adjust Brightness Level Properly
To adjust the brightness level, you need to swipe up from the bottom of the screen. Next up, you can drag the brightness slider right or left according to your requirement. This would help you set a certain brightness level.
Solution 1: Switch OFF Auto-Brightness
Follow the steps mentioned below to disable Auto-brightness
Step 1: Open Settings App.
Step 2: Next up, tap on Display & Brightness
Step 3: Make sure to Switch off the Auto brightness
Step 4: Now, it’s time for a hard reset. To do it, press Sleep/Wake and Home buttons together to turn off your device. Wait for a few minutes, and then start your device again.
Solution 2: Turn Off Reduce Transparency
Follow the steps mentioned below:
Step 1: Open the Settings app on your device.
Step 2: Next up, tap on General.
Step 3: Next, you need to tap on Accessibility.
Step 4: Tap on Increase Contrast.
Step 5: At last, toggle off Reduce Transparency.
Solution 3: Disable Reduce White Point
If Reduce White point is ON in your device, then it reduces the intensity of the light. Therefore, you need to disable it. To do so, follow the steps mentioned below:
Step 1: Open Settings on your device.
Step 2: Tap on General.
Step 3: Next up, select Accessibility.
Step 4: Head to Display Accommodation and toggle off the switch, provided next to Reduce White Point.
Read more: iPhone 6 and 6 Plus Reboot Randomly: How To Fix This Issue
Solution 4: Disable Invert Colours, Colour Filters
Make Sure that Invert Colours and Colour filters are not enabled on your device. To turn it off, follow the steps mentioned below:
Step 1: Open Settings and Tap on General
Step 2: Next up, tap on Accessibility and thereafter, tap on Display Accommodation.
Step 3: At last, toggle off the switch next to Invert color.
To turn off the Colour Filters, follow:
Settings 🡪 General 🡪 Accessibility 🡪 Display Accommodations 🡪 Colour Filters 🡪Toggle Off the switch
Solution 5: Ambient Light Sensor
More often than not, it is the ambient light sensor that turns out to be a culprit and creates a fluctuation in brightness. The primary function of the ambient light sensor is to provide you optimum brightness whenever you happen to be in the dark place. Meanwhile, it automatically brightens the device screen so that you can get accurate readability. On the other hand, whenever your device comes under the impression of heavy sunlight, it automatically gets dim so that you can have a decent vision.
Note that whenever you try locking/unlocking your iPhone’s screen, the ambient light sensor won’t be eligible to function. Therefore, the first thing you need to do is lock/unlock your device, and check whether your issue is fixed or not. Meanwhile, you can clear the device’s case and remove the dirt, which could be the reason that does not allow ambient light sensors to run correctly.
Solution 6: Turn Off Zoom
As we have met few experts who have to disable Zoom and they have solved the issue. Therefore, we can give it a go. Follow the steps mentioned below:
Step 1: Open Settings app, and tap on the General
Step 2: Next up, tap on Accessibility
Step 3: Then, you need to tap on Zoom
Step 4: Here, you need to disable Zoom by turning it off.
Solution 7: Try resetting all settings
If none of the methods helped you solve the issue, you could always choose to reset the device completely. When you reset your device, it will change the previous settings. As it does not affect your media library, it could be an option worth trying. Follow the steps mentioned below to do so:
Step 1: First, you need to launch the Settings app on your iPhone.
Step 2: Now, tap on General.
Step 3: Scroll down and tap on the Reset.
Step 4: Next up, you need to rap on the Reset All Settings and Confirm your selection from the next appearing pop-up.
Solution 8: Update to the latest iOS
If you are still unable to fix the solution, then make sure that your iPhone is running on the latest version. To update your iOS device, follow the steps mentioned below:
Step 1: Launch Setting app.
Step 2: Next up, tap on general and then, select Software Update.
Solution 9: Contact Apple’s support center
After trying every solution, if you are still unsatisfied with the outcome, then you can directly contact Apple’s support center. Aware them with the issue, so that then can quickly resolve it.
Read More :
Is Your iPhone Randomly Skipping Tracks? Try This Fix
How to Turn Off Notification Sound in Facebook Messenger App on iPhone
How to Update Airpods Firmware
How to Delete Twitter Account on iPhone
